Home > Data Storage > Netapp Storage > NetApp Filers > F800 Series Filers > NetApp F825 Filer

NetApp F825 Filer
NetApp F825 Filer
 
Specifications:

General

Operating System
Network Appliance™ Data ONTAP™ 6.5.1 software
Standard Software Features
Integrated automatic RAID manager, Snapshot,™ Fast Boot, telnet, e-mail alerts, NIS,
DNS, SNMP, FilerView®, NDMP
Network Protocol Support
NFS V2/V3/V4 over UDP or TCP, PCNFSD V1/V2 for (PC) NFS client authentication,
Microsoft® CIFS, DAFS, VLD, HTTP 1.0, HTTP 1.1 virtual hosts
Hardware Features
Full-duplex 10/100Base-T Ethernet onboard, diagnostic LED/LCD, 19" rack-mount enclosure,
redundant hot-plug cooling fans, redundant hot-plug power supplies, floppy drive
(F810/c), (CompactFlash on F825/c), optional 220V 42U 19" system cabinet
Default/Min./Max. RAID Group Sizes
Default: 7 data + 1 parity/Min.: 1 data + 1 parity/Max.: 13 data + 1 parity
Disk Shelves Supported (Fibre Channel)
FC7, FC8, FC9, DS14, DS14mk2 FC
Disk Drive Capacities Supported (FC)
91/181/36/72/144GB

System Specifications

Max. Raw Capacity
3TB
Max. Number of Disk Drives
112
Max. Number of FC Loops
4
Max. Drives per FC Loop
56 or 842
Volumes and RAID Groups (min./max.)
Min. of 1 RAID Group per Volume
1/56
Max. Volume Size
2TB
ECC Memory
1GB
Non-Volatile Memory
128MB
PCI Expansion Slots
7
Optional Network Connectivity (total)
4 max.
Dual Gigabit Ethernet (Cu or optical)
3 max.
Quad 10/100Base-T Ethernet
N/A
Gigabit Ethernet (Cu or optical)
4 max.
DAFS—(GbE VI/IP
3 max.
Fibre Channel Target Mode HBA - SAN
2 max. (single host attach)
Fibre Channel Disk HBA
4 max.
Fibre Channel Disk Adapters
2 max
Clustered Failover-Capable
Optional
Optional LVD, FWD SCSI, FC HBA for Backup
1 max.

System Environment

AC Power/Max. Current
100 to 240VAC, 5A @ 100VAC
Thermal Rating
600 Btu/hr; 580 Btu/hr
Weight
66 lb (30 kg)
Height
5.1 EIA U (8.75", 22.2 cm)
Width
19" IEC rack-compliant (17", 43.2 cm )
Depth
24" (61 cm) chassis alone,+ 1.5" (3.8 cm) bezel
Operating Temperature and Relative Humidity
10° C to 40° C (50° F to 104° F); 20% to 80% RH, noncondensing
Nonoperating Temperature and Relative Humidity
-20° C to 65° C (-4° F to 149° F); 8% to 95% RH, noncondensing, in original container
Operating Acoustic Noise
less than 52 dBa at 1 m
Min. Service Clearances
9" (23 cm) front; 30" (76 cm) rear; 3" (7.6 cm) rear for cable radius

Storage Subsystem Specifications - SCSI Disk Shelf 12 (SDS12)

Disk Drive Storage Shelf
DiskShelf14 family– DS14 and DS14mk2 FV; each w/ 14 low-profile slots for FC disk drives
Disk Drive Storage Shelf Interface
PCI-based Fibre Channel-Arbitrated Loop (FC-AL)DiskShelf14-14 low-profile slots for FC disk drives
DiskShelf14 Interface
Dual, redundant loop resiliency circuit (LRC) modules or dual, redundant electronically switched hub (ESH) modules
Power Supply/Cooling Fans
Dual, redundant, hot-pluggable, integrated power supply/fan assemblies (220V/110V)

Storage Subsystem Environment - SCSI Disk Shelf 12

AC Power/Max. Current
100 to 120 VAC/4 A; 200 to 240 VAC/2 A
Operating Environment
10° C to 40° C (50° F to 104° F); 5% to 95% relative humidity, noncondensing
Non-operating Environment
-40° C to 65° C (-40° F to 149° F); 5% to 95% relative humidity, noncondensing
Thermal Rating
1,195 Btu/hr (fully loaded shelf), 1,191 Btu/hr (LRC)
Operating Acoustic Noise
less than 60 dBa @ 1 m at 20° C