Cisco WS-C2960S-24TD-L 24 10/100/1000 Ethernet ports, Two 1 Gig or 10 Gig Uplinks, LAN Base 10 Gig Switch
Enclosure type: 1 RU, Rack-mountable
Number of Ports: 24 10/100/1000 Ethernet ports and 2 SFP+ uplinks
Speed / Data Transfer Rate: 10/100/1000
Performance Details: 176 Gbps
QoS (Quality of Service): Yes
Network Management Type: Managed
Switch Capacity: 255 VLANs
Remote Management Protocol: • BRIDGE-MIB • CISCO-CABLE-DIAG-MIB • CISCO-CDP-MIB • CISCO-CLUSTER-MIB • CISCO-CONFIG-COPY-MIB • CISCO-CONFIG-MAN-MIB • CISCO-DHCP-SNOOPING-MIB • CISCO-ENTITY-VENDORTYPE-OID-MIB • CISCO-ENVMON-MIB • CISCO-ERR-DISABLE-MIB • CISCO-FLASH-MIB • CISCO-FTP-CLIENT-MIB • CISCO-IGMP-FILTER-MIB • CISCO-IMAGE-MIB • CISCO-IP-STAT-MIB • CISCO-LAG-MIB • CISCO-MAC-NOTIFICATION-MIB • CISCO-MEMORY-POOL-MIB • CISCO-PAGP-MIB • CISCO-PING-MIB • CISCO-POE-EXTENSIONS-MIB • CISCO-PORT-QOS-MIB • CISCO-PORT-SECURITY-MIB • CISCO-PORT-STORM-CONTROL-MIB • CISCO-PRODUCTS-MIB • CISCO-PROCESS-MIB • CISCO-RTTMON-MIB • CISCO-SMI-MIB • CISCO-STP-EXTENSIONS-MIB • CISCO-SYSLOG-MIB • CISCO-TC-MIB • CICSO-TCP-MIB • CISCO-UDLDP-MIB • CISCO-VLAN-IFTABLE • RELATIONSHIP-MIB • CISCO-VLAN-MEMBERSHIP-MIB • CISCO-VTP-MIB • ENTITY-MIB • ETHERLIKE-MIB • IEEE8021-PAE-MIB • IEEE8023-LAG-MIB • IF-MIB • INET-ADDRESS-MIB • OLD-CISCO-CHASSIS-MIB • OLD-CISCO-FLASH-MIB • OLD-CISCO-INTERFACES-MIB • OLD-CISCO-IP-MIB • OLD-CISCO-SYS-MIB • OLD-CISCO-TCP-MIB • OLD-CISCO-TS-MIB • RFC1213-MIB • RMON-MIB • RMON2-MIB • SNMP-FRAMEWORK-MIB • SNMP-MPD-MIB • SNMP-NOTIFICATION-MIB • SNMP-TARGET-MIB • SNMPv2-MIB • TCP-MIB • UDP-MIB • ePM MIB • CISCO-STACKWISE-MIB (2960-S)
Networking Standards: • IEEE 802.1D Spanning Tree Protocol • IEEE 802.1p CoS Prioritization • IEEE 802.1Q VLAN • IEEE 802.1s • IEEE 802.1w • IEEE 802.1X • IEEE 802.1ab (LLDP) • IEEE 802.3ad • IEEE 802.3af • IEEE 802.3ah (100BASE-X single/multimode fiber only) • IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports • IEEE 802.3 10BASE-T specification • IEEE 802.3u 100BASE-TX specification • IEEE 802.3ab 1000BASE-T specification • IEEE 802.3z 1000BASE-X specification • 100BASE-BX (SFP) • 100BASE-FX (SFP) • 100BASE-LX (SFP) • 1000BASE-BX (SFP) • 1000BASE-SX (SFP) • 1000BASE-LX/LH (SFP) • 1000BASE-ZX (SFP) • 1000BASE-CWDM SFP 1470 nm • 1000BASE-CWDM SFP 1490 nm • 1000BASE-CWDM SFP 1510 nm • 1000BASE-CWDM SFP 1530 nm • 1000BASE-CWDM SFP 1550 nm • 1000BASE-CWDM SFP 1570 nm • 1000BASE-CWDM SFP 1590 nm • 1000BASE-CWDM SFP 1610 nm • 10GBASE-LR (SFP+) • 10GBASE-SR (SFP+) • 10GBASE-LRM (SFP+) • 10GBASE-CX1 (SFP+) • RMON I and II standards • SNMP v1, v2c, and v3
Layer: Layer 2
VLAN Support: Yes
MAC Address Table: 8000
DHCP Server: Yes
IGMP Snooping: Yes
Authentication Method: RADIUS , Secure Shell (SSH) , TACACS+
MAC Address Filtering: Yes
Connectivity: Wired
Memory Configuration: 128 MB Installed; 64 MB Flash Memory
MTBF (Mean Time Before Failure): 332,958 hours
Temperature Range (storage): -13 °F to 158 °F
Temperature Range (operating): 23 °F to 104 °F
Relative Humidity Range: 10 to 95% (non-condensing)
This item is Refurbished. This item has been tested by Vibrant's team of experienced technicians test to ensure proper operation.
The Cisco WS-C2960S-24TD-L is a rack mountable Ethernet switch that belongs to the intelligent Catalyst series. It is specifically designed to adapt to the demands of small to large network environments, and increase LAN efficiency. The Cisco WS-C2960S-24TD-L also provides ease of use, improved sustainability, a borderless experience and is appointed with a plethora of features including layer 2 switching, quality of service, trivial file transfer protocol, dynamic trunking protocol, multiple spanning tree protocol, IPv6 support, dynamic IP address assignment, MLD snooping, VLAN support, multicast storm control, LED status indicators for ports, dynamic ARP inspection, Syslog support, 128 MB Ram and 64 MB flash memory.
Related Models: